Home › Forums › Main 1300tourer.com Forums › 1300 Modifications

Installing RSTD Bars and want the Kuryakyn grips ..what will I need?

Thu, 2008-07-03 17:41 — Roadstravelled

Again I am digging into the wallet yet again for another mod from the forum. My wife is beginning to think this forum is bad for our retirement :) I was going to have this done by the dealer but after doing the Steibel horn myself and feeling empowered by the great detailed instructions by subnuke I am going to tackle it. I plan to use the Kuyakyn iso grips. What parts will I need other than the bar itself and the grips, if any? Thank you in advance....Mike

‹ Memphis Slims. Bending Stock Handlebar ›
Sat, 2008-07-05 11:39 — ddd269

You can use the glue that

You can use the glue that came with it, or like many others have, use hair spray. Yes, hair spray. It works great!

Just make sure you roughen up the left grip with sand paper/emery cloth for good adhesion.

I just did the RSTD and Kuryakyn Flame grip on Tuesday and looks great.

Photobucket

Fri, 2008-07-04 08:16 — kevin

new grips install

Be careful putting on the new grips, do a few practice install without the glue first, slide them on smoothly and firmly don't hesitate for a moment or they'll get stuck right there. Good luck, let us know how it goes. ~ kevin

Thu, 2008-07-03 22:17 — subnuke

Nothing.

You will not need any additional parts. Everything you need for the grips comes with them and there are no other parts required for the bars. All of the stock cables work on the new bars without a problem. Good luck.

Fair winds~

David